10.10.10. Replacement of a lamp on a back wing

Operations on replacement of a back lamp are shown on the right lamp, replace the left lamp similarly.

You will need a face key "on 10".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Disconnect a block of a plait of wires from lamp conclusions.
3. Turn out two nuts of hairpins of fastening of a lamp to a body …
4. … remove washers …

Under the top washer the "minus" plug of a lamp is located, do not forget to connect it at installation of a lamp.

5. … and a lamp together with its sealing laying.
6. Establish a back lamp as it should be, the return to removal.