10.10.5. Replacement of lamps

Prevention
Before replacement of lamps in lighting fixtures of the car disconnect a wire from the minus plug of the rechargeable battery.

It will be required to you: screw-drivers with flat and crosswise edges.
For replacement of a lamp in a headlight of head light execute the following operations.
1. Remove a headlight of head light from the relevant party (see. "Replacement of headlights of head light").
2. Bring the ends of the spring holder out of cuts in an optical element of a headlight …
3. … also take a lamp.
4. Establish a new lamp as it should be, the return to removal.

For replacement of lamps in a front position lamp execute the following operations.

Note
Lamps in a front position lamp are so located:
1 – a lamp of the forward index of turn (a single-stranded lamp of A12-21-3 with a power of 21 W, with a flask of yellow color);
2 – lamp of dimensional light (single-stranded lamp of A12-5 with a power of 5 W).

1. Turn out three screws of fastening of the lens to a front position lamp …
2. … also remove the lens.
3. Having turned a lamp of the forward index of turn counterclockwise, take it from the boss of a front position lamp.
4. Similarly replace a lamp of dimensional light.
5. Establish a new lamp as it should be, the return to removal.

For replacement of a lamp in the side index of turn execute the following operations.
1. Turn out two screws of fastening of the lens to the case of the index of turn …
2. … also remove the lens.
3. Having turned a lamp of the index of turn counterclockwise …
4. … take it from the boss of the index of turn.
5. Establish a new lamp as it should be, the return to removal.

For replacement of lamps in a back lamp execute the following operations.

Note
Lamps in a back lamp are so located:
1 – lamp of the back index of turn (single-stranded lamp of A12-21-3);
2 – lamp of dimensional light (single-stranded lamp of A12-5);
3 – stoplight lamp (single-stranded lamp of A12-21-3).

1. Turn out four screws of fastening of the lens to a lamp …
2. … turn a lamp of dimensional light counterclockwise …
3. … also take it from the boss of a lamp.
4. Similarly replace lamps of the back index of turn and a stoplight.
5. Establish a new lamp as it should be, the return to removal.

For replacement of lamps in an additional stoplight execute the following operations.
1. Turn out two screws of fastening of a back cover of an additional stoplight to its case …
2. … separate a back cover of a stoplight and its case …
3. … also take the fused lamp.
4. Establish a new lamp as it should be, the return to removal.

For replacement of lamps in lamps of illumination of registration plate execute the following operations.
1. Turn out the screw of fastening of a cover of a lamp …
2. … uncover with a lamp together with the lens …
3. … and, having turned counterclockwise a lamp lamp, take it from the boss.
4. Similarly replace the second lamp of a lamp.
5. Establish a new lamp as it should be, the return to removal.

For replacement of a lamp in a back fog lamp execute the following operations.
1. Turn out two screws of fastening of the lens of a fog lamp …
2. … remove the lens …
3. … and, turning a lamp counterclockwise, take it from a lamp.
4. Establish a new lamp as it should be, the return to removal.

Replace a lamp in a lamp of light of a backing similar to replacement of a lamp in a back fog lamp.

For replacement of a lamp in a plafond of illumination of salon execute the following operations.
1. Turn the lens of a plafond counterclockwise …
2. … also remove it.
3. Turn a plafond lamp counterclockwise …
4. … also take it from the boss of a plafond.
5. Establish a new lamp as it should be, the return to removal.

For replacement of a lamp in a plafond of illumination of a motor compartment execute the following operations.
1. Turn a reflector in the situation convenient for replacement of a lamp …
2. … turn a lamp counterclockwise and take it from the boss of a plafond.
3. Establish a new lamp as it should be, the return to removal.