10.15.1. Removal and installation of the electric motor of the fan of system of heating and ventilation of salon

It will be required to you: a key "on 10", the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Open a heater cover, turn a krylchatka of the electric motor of the fan in situation at which access to the fixing screw of a krylchatka is open, and turn out the fixing screw.
3. Separate a block of a plait of wires of the electric motor of the fan of a heater.
4. Turn out a bolt of fastening of the electric motor of a heater, the fixing arm of a plait of wires …
5. … turn out other two bolts of fastening of the electric motor to the heater case …
6. … also remove the heater electric motor.
7. Turn out two nuts of hairpins of fastening …
8. … also remove a washer of its fastening from the heater electric motor.
9. Install the heater electric motor as it should be, the return to removal.