10.17.4. Replacement of lamps in blocks of control and alarm lamps

You will need two screw-drivers with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Hook the screw-driver the lens of the block of control lamps and, overcoming resistance of clamps, remove it.
3. Remove the light filter.
4. Overcoming resistance of four plastic clamps …
5. … take the block of control and alarm lamps from the dashboard.
6. Having turned counterclockwise, take a cartridge of the replaced lamp from the block of lamps and take a lamp from the boss.
7. Establish a new lamp and all earlier removed details as it should be, the return to removal.