10.3.3. Removal and installation of assembly blocks
You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
|
|
2. Turn out two screws of fastening of an arm of assembly blocks to an arm on a body.
|
3. Take assembly blocks from an installation site.
|
|
|
4. Disconnect plugs with wires from conclusions of a plafond of illumination of assembly blocks.
|
5. Having marked an arrangement of blocks of plaits of wires concerning conclusions of assembly blocks, disconnect them from conclusions of blocks and remove assembly blocks.
|
|
|
6. Remove an illumination plafond from an arm of assembly blocks.
|
7. Turn out on both sides two screws of fastening and remove assembly blocks from an arm.
|
8. Install assembly blocks and all earlier removed details as it should be, the return to removal.