10.4.4. Replacement of a belt of the drive of the generator

It will be required to you: keys "on 10", "on 12".
1. Take off a belt of the drive of the pump of the hydraulic booster of steering (see. "Replacement of a belt of the drive of the pump of the hydraulic booster of steering and pulley of the fan").
2. Weaken an inhaling of a bolt of fastening of a tension roller on two-three turns.
3. Turning out an adjusting bolt, weaken a belt tension …
4. … also remove it.
5. Establish a new belt and, rotating a bolt of a tension roller, achieve a deflection of a belt of 15 mm under the load of 80 N (8 kgfs) enclosed in the middle belt branches between the generator and the water pump.

Good advice
The tension can be checked, delaying a belt branch spring scales like steelyard.

6. Tighten a bolt of fastening of a tension roller and establish into place a belt of the drive of the pump of the hydraulic booster of steering.