11.10.2. Removal and installation of locks and drive of locks of a cowl

It will be required to you: the screw-driver with a crosswise edge, keys "on 8", "on 10", passatizh, flat-nose pliers.
For removal of the handle of opening of a cowl execute the following.
1. Turn out two bolts of its fastening to a body …
2. … take the handle aside …
3. … unbend a drive cable …
4. … shift the fixing plug from a loop …
5. … take a cable from a handle eye …
6. … also remove the handle from the car.
7. Install the handle as it should be, the return to removal.

For removal of buffers of a cowl execute the following.
1. Turn out two screws with nuts of fastening of buffers to facing of a radiator …
2. … remove the fixing plate from the buffer and remove the buffer from the car.
3. Remove the second buffer similarly.
4. Install buffers as it should be, the return to removal.

For removal of locks of a cowl execute the following.
1. Holding the fixing bolt of the right lock, turn off a nut, remove a washer …
2. … also bring a cable out of the fixing bolt.
3. Similarly bring a cable out of the fixing bolt of the left lock and an arm of fastening, having dragged it through openings in facing of a radiator.
4. Turn out two bolts of fastening of the right lock …
5. … also remove the lock.
6. Similarly remove the left lock.
7. Mark an arrangement of latches of locks of a cowl …
8. … also turn out two bolts of fastening of latches.
9. Remove latches of locks from a cowl.
10. Put cowl locks as it should be, the return to removal.

For removal of a cable of the drive of locks of a cowl execute the following.
1. Disconnect a cable from the fixing bolts of locks (see above), turn off nuts of arms of fastening of a cover of a cable to the left mudguard of a motor compartment …
2. … disconnect a cable from the handle of opening of a cowl and remove a cable, bringing him through a motor compartment.
3. Establish a drive cable as it should be, the return to removal.

For removal of a safety hook of a cowl execute the following.
1. Turn out two bolts of fastening of a safety hook to a cowl …
2. … also remove a safety hook.
3. Establish a safety hook as it should be, the return to removal.