It will be required to you: screw-drivers with flat and crosswise edges.

1. Remove the internal handle of the lock of a door (see. "Removal and installation of the internal handle of the lock of a door").

2. Turn out two screws of the lock from a door end face …	3. … two screws from the internal panel of a door …

4. … also remove the lock together with draft of the internal handle.	5. Remove draft of the internal handle from draft of the lock.

6. Turn out two screws of fastening and remove the rubber buffer of a door.

Note The rubber buffer fastens to a door two bolts screwed in the plate which is from a reverse side of a door with carving openings.

7. An impact driver turn out two screws of fastening of a clamp of the lock and remove a clamp together with an adjusting plate.

8. Put the lock and all details as it should be, the return to removal.