11.12.3. Removal and installation of the internal handle of a door of a back

You will need the screw-driver with a crosswise edge.
1. Remove a back door upholstery (see. "Removal and installation of an upholstery of a door of a back").
2. Turn out two screws of fastening of the handle to the internal panel of a door …
3. … take the handle together with draft of the drive of the lock through a technological window …
4. … disconnect one edge of a rubber clamp from draft …
5. … also remove the handle from draft.
6. Examine a rubber clamp of draft of the lock and replace it in case of damage or at emergence of signs of aging.
7. Install the internal handle of a door of a back as it should be, the return to removal.