11.12.7. Removal and installation of a door of a back

Note
Back door quite heavy and bulky therefore we recommend to remove it with the assistant.

You will need a key "on 14".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an additional stoplight (see. "Replacement of an additional stoplight").
3. Remove a rubber sealing ring from a plait of wires of an additional stoplight.

Useful tips
If you remove a back door not for replacement, tie a wire to a plait of wires of an additional stoplight and leave it in a door cavity that at installation of a door it was convenient to lay back a plait of wires of a stoplight.
Mark an arrangement of loops of a door on a frame to avoid their subsequent adjustment.

4. Take a plait of wires of an additional stoplight from a door cavity.
5. Separate a block of a plait of wires of glass cleaner of a door of a back …
6. … disconnect a back door glass washer hose from a nozzle …
7. … also take plaits of wires together with a washer hose from a back door.
8. Remove the limiter of opening of a door of a back (see. "Removal and installation of the limiter of opening of a door of a back").
9. Turn out three bolts of fastening of the lower loop to a frame …
10. … three bolts of fastening of the top loop to a frame also remove a back door from the car.
11. Establish a back door as it should be, the return to removal.