11.12.9. Removal and installation of a frame of a door of a back

It will be required to you: keys "on 10", "on 13", the screw-driver with a flat edge.
1. Remove a back door (see. "Removal and installation of a door of a back").
2. Remove a back hand-rail (see. "Removal and installation of hand-rail").
3. Turn out a bolt of forward fastening of facing of the left back rack.
4. Take clamps of nine plastic holders, take holders …
5. … also remove facing of the left back rack.

Openings of plastic clamps of facings of back racks are so located.

6. Similarly remove facing of the right back rack.
7. Remove the top facing of a doorway of a back.
8. Take a hose of a washer and plaits of wires from an opening in a door frame.
9. Turn out on one bolt of arms of average fastenings of a frame of a door of a back to a body …
10. … turn out two bolts of the lower fastening of a frame of a door of a back to a roof …
11. … turn out six bolts of fastening of arms and remove a back door frame from the car.

Arms of the top fastening of a frame are so located to a roof.

12. Establish a back door frame as it should be, the return to removal.