11.14.2. Removal and installation of glass of a wind window

You will need two screw-drivers with a flat edge.
1. To take out the damaged windshield, remove levers of screen wipers (see. "Removal, installation and dismantling of screenwash").
2. Fill sealant edges above for a flange of an aperture of a body and, pressing the top corners of glass, squeeze out it outside. The assistant has to support glass outside.
3. Remove a sealant from glass.
4. Before installation of a windshield wash out water and blow compressed air sealant grooves.
5. Put on a sealant glass.
6. Grease a groove of a sealant by which it is established on a body flange, glycerin or soap solution.
7. By means of the screw-driver enclose a cord in a groove.
8. Establish glass in an aperture of a body and then, extending the ends of a cord from a sealant in a body, achieve that glass with a sealant sat down on the place. The assistant at the same time has to press slightly on glass outside. If glass is not established, check the body aperture sizes, using glass without sealant. Eliminate deviations of the sizes of an aperture with a rikhtovka.
9. Replace back door glasses, side glasses of a body similar to replacement of a windshield.