11.15.1. Removal and installation of krysheklyuk of bulk pipes of the fuel tanks
Note
This operation is shown on the left cover, remove the right cover similarly.
|
It will be required to you: the screw-driver with a flat edge, a key "on 7".
|
|
1. Accurately wring out the spring mechanism of a cover …
|
2. … also remove the spring mechanism.
|
|
|
3. Turn out two screws with nuts of fastening of an arm of a cover to a body …
|
4. … also uncover the hatch of a bulk pipe of the fuel tank the car.
|
5. Establish a cover of the hatch of a bulk pipe of the fuel tank as it should be, the return to removal.