11.19.1. Removal and installation of the dashboard

You will need the screw-driver with a flat edge.
1. Remove arms of a wind window (see. "Removal and installation of arms of a wind window").
2. Remove understeering switches assembled with their basis (see. "Check and replacement of understeering switches").
3. Turn off a nut of fastening of the main cylinder of the hydroproofreader of headlights to the dashboard and push the main cylinder in the dashboard (see. "Replacement of the hydroproofreader of headlights").
4. Remove a speedometer (see. "Removal and installation of a speedometer").
5. Remove a combination of devices (see. "Removal and installation of a combination of devices").
6. Remove the regulator of lighting of devices (see. "Removal and installation of the regulator of lighting of devices").
7. Remove the switch of the alarm system (see. "Removal and installation of the switch of the alarm system").
8. Hook the screw-driver with the sting which is wrapped up by an insulating tape, two caps of openings in the dashboard …
9. … also remove caps.
10. Turn out two bolts of fastening …
11. … remove a hand-rail from the dashboard …
12. … also remove the dashboard.
13. Install the dashboard as it should be, the return to removal.