11.2.1. Removal, dismantling and installation of a front bumper

It will be required to you: two keys "on 10", two keys "on 14", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Disconnect plugs with wires from conclusions of forward fog lights.
3. Turn off two nuts from each party, remove washers, take bolts of fastening of a bumper to a frame …
4. … also remove a bumper.
5. Turn out two bolts of fastening and remove an arm of fastening of the left fog light.
6. Similarly remove an arm of fastening of the right fog light.
7. Turn out two screws of fastening and remove registration plate.
8. Turn off on one nut of hairpins of side fastenings …
9. … turn off on one nut of bolts of the lower fastenings of facing of a bumper to his amplifier, take bolts …
10. … also remove the amplifier of a bumper from facing.
11. Collect and establish a bumper and all details as it should be, the return to removal.