11.2.2. Removal, dismantling and installation of a rear bumper

It will be required to you: keys "on 8", "on 12", "on 13", "on 14", "on 17", a key face "on 14", the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Separate blocks of plaits of wires of a lamp of a backing, a fog lamp and lamps of illumination of registration plate.
3. Turn off two nuts of bolts of fastening of a bumper to arms on a frame and remove a bumper.
4. Turn out two screws of fastening of registration plate and remove registration plate.
5. Turn off two nuts of bolts of side fastening of the amplifier of a bumper to its facing from each party, take bolts …
6. … turn off three nuts of bolts top and three nuts of screws lower fastenings of facing of a bumper to the amplifier, take bolts …
7. … also take the amplifier from facing.
8. Turn off two nuts of bolts of fastening of the left arm to a frame and remove an arm.
9. Similarly remove the right arm.
10. Collect and establish a bumper and all details as it should be, the return to removal.