11.20.3. Removal and installation of the crane of a heater
It will be required to you: a key "on 10", screw-drivers with flat and crosswise edges.
1. Merge cooling liquid (see. "Replacement of cooling liquid").
|
|
2. Weaken an inhaling of collars of fastening of hoses of branch and a supply of cooling liquid to the heater crane …
|
3. … also remove hoses from crane branch pipes.
|
|
|
4. Weaken an inhaling of collars of fastening of hoses of branch and a supply of cooling liquid to a radiator of a heater and remove hoses from branch pipes.
|
5. Turn out two nuts of hairpins of fastening of the crane of a heater to a body …
|
|
|
6. … remove the heater crane from the car …
|
7. … weaken an inhaling of collars of fastening of hoses to the heater crane …
|
|
|
8. … remove hoses from the crane …
|
9. … also remove sealing laying from the crane.
|
10. Install the crane of a heater and all earlier removed details as it should be, the return to removal.