12.2.1. Main set of tools

Even if you will carry out simple repair work, you will need a set of the minimum quantity of tools. The following keys and devices are included in this package:
– a set of screw-drivers with flat and crosswise edges of the different sizes, with convenient handles. At the choice of screw-drivers (especially with a crosswise edge) be accurate as the improper size of an edge can break vents in a screw head;
– Rozhkov' set and cap keys. It is desirable to have   keys from 5 to 27 mm in size, and at car repairs of import production keys of any size from the specified range, for example "on 15" or "on 18" can be necessary;
– candle keys "on 16" or "on 21" ( depending on a standard size of the spark plugs applied on your car);
– a set of keys hexagons of the different sizes (   the sizes from 2 to 10 mm with a step of 1 mm are most often necessary);
– passatizh, bokoreza and passatizh with changeable capture;
– hammers of the different sizes with metal and rubber baizes (the last are necessary when carrying out leveling works);
– center punches of the different sizes (are necessary when carrying out drilling works), a set of chisels (it is possible to use to zakontrit a nut or to cut down such which cannot be turned off);
– at work with system of electric equipment special passatizh are necessary for a staving of plugs and plugs, the device for cleaning of wires, the indicator screw-driver and a set of plugs of various standard sizes;
– during the works with remote knots and units a set of face keys with a neck rattle and the cardan hinge is necessary;
– a set of universal strippers of the different sizes for a vypressovka of bearings and other details.