4.2.3. Check of level and a dolivka of oil in the lubrication system

It will be required to you: engine oil, funnel, pure rag.

Before check of level of oil after a trip kill the engine and wait 5–10 min. until oil merges in the pallet.
Add oil of the same brand, as well as used earlier.
Oil level in a case of the engine should not exceed the tag "П", otherwise leaks through laying and epiploons, and also the raised oil consumption are possible.
You carry out an inspection, having installed the car on the flat horizontal platform.

1. Take out the probe, wipe it with a pure rag and again insert into place.
2. Take out the probe. Level of an oil film has to be between the tags "П" and "0". If level is near a tag "0", add oil.
3. Turn a cover of an oil-filling mouth approximately on 120 ° counterclockwise and remove it.
4. Establish a funnel in an oil-filling mouth and add oil. Check oil level. Before taking out the probe, wait 2–3 min. that oil flew down in the case pallet.
5. Wrap a cover of an oil-filling mouth.