4.3.19. Check and adjustment of a tension of a belt of the drive of the generator and water pump
It will be required to you: face and cap keys "on 13".
|
|
1. Weaken a bolt of fastening of a tension roller …
|
2. … and an adjusting bolt adjust a belt tension.
|
Fig. 4.4. Check of a deflection of a belt of the drive of the generator and water pump
|
Achieve a deflection of a belt of the drive of the generator and the water pump equal to 15-18 mm (fig. 4.4) at the load of 80 N (8 kgfs) enclosed in the middle belt branches between the generator and the water pump.
Good advice
The tension can be controlled, delaying a belt branch spring scales like steelyard.
|
3. Tighten a bolt of fastening of a tension roller.