4.3.3. Check of level and a dolivka of oil in the transfer case

It will be required to you: gearbox oil (see the appendix 3), a six-sided key "on 12", the syringe for filling of units of transmission with oil, a pure rag.
1. Install the car on a viewing ditch or the elevator.
2. Clear of dirt a stopper of an oil-filling opening a metal brush, and then a rag. Level of oil is limited by the lower edge of the oil-filling opening located on a cover of a case of the transfer case.
3. Turn out a stopper of an oil-filling opening and wipe it with a pure rag.
4. Check oil level. At excess of level oil will follow.
5. If oil is not enough, add it by means of the syringe.
6. Screw a stopper of an oil-filling opening and remove with a rag begin to flow oils.