4.4.4. Adjustment of the drive of switching off of coupling

At operation sometimes there is a need of adjustment of the course of a pedal change of its situation (having lifted or having lowered a pedal). For this purpose at the main cylinder the adjusting knot is provided.
The course of a pedal is regulated, changing length of a pusher of the main cylinder. For this purpose disconnect a pusher from a pedal, weaken a nut of 1 adjusting knot of a pusher and, turning an eye 2 in the necessary party, achieve the required result. After that tighten a nut and connect a pusher to a pedal.

Note
The full speed of a pedal of coupling has to be within (150±20) mm.
The free wheeling of a pedal is not regulated.