5.13.1. Replacement of laying of a cover of a head of the block of cylinders

If leak of oil from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of bolts of fastening of a cover, replace its laying.
It will be required to you: a key "on 12", the screw-driver.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Merge liquid from the cooling system (see. "Replacement of cooling liquid").
3. Weaken an inhaling of a collar of the bringing hose and take him aside.
4. Disconnect plastic holders of a hose and plait of wires.
5. Take out a plait of wires of the sensor of provision of a bent shaft from the holder.
6. Remove tips of high-voltage wires from spark plugs.

Note
If replacement of high-voltage wires is not supposed, tips can be not taken out from cover wells.

7. Weaken a ventilation hose collar …
8. … also remove a hose.
9. Weaken a depression selection hose collar …
10. … also remove a hose.
11. Disconnect blocks of wires from sockets of primary winding of the coil of ignition.
12. Disconnect a block of wires of the sensor of a phase.
13. Turn out bolts of fastening of a cover of a head of the block...
14.... also uncover together with laying, high-voltage wires and coils of ignition.
15. Separate laying from a cover.
16. Examine a condition of sealants of a cover of a head of the block of cylinders and maslootrazhatelny tubes, if necessary replace them.
17. Degrease cover surfaces …
18. … and heads of the block of cylinders.
19. Establish new laying on a cover, establish a cover as it should be, the return to removal, and connect all hoses and wires.