5.19.2. Removal and installation of a reception pipe

It will be required to you: keys "on 12", "on 13", a face head "on 17".
1. Install the car on a viewing ditch or the elevator.
2. Separate a block of a plait of wires of the sensor of concentration of oxygen.
3. Turn off four couples of nuts of fastening of a reception pipe to a final collector.
4. Turn off three nuts of fastening of catalytic converter to a reception pipe, take bolts …
5. … also remove the sealing laying established between converter and a reception pipe.
6. Turn off a nut of fastening of a clamping level, holding with the second key a bolt from a provorachivaniye …
7. … remove a clamping plate …
8. … also take an inlet pipe.
9. Turn out the sensor of concentration of oxygen from an exhaust pipe.
10. Remove old laying of an exhaust pipe.
11. Establish a new exhaust pipe as it should be, the return to removal.