5.20.10. Removal and installation of a fuel stage

The fuel stage is removed for check and replacement of nozzles, and also for replacement of the stage or an inlet pipe.
It will be required to you: keys "on 8", "on 17", "on 19", the screw-driver with a flat edge.
1. Reduce pressure in a power supply system (see. "Pressure decrease of fuel in a power supply system").
2. Remove a receiver (see. "Replacement of laying of an inlet pipe").
3. Having hooked the screw-driver clamps of blocks of plaits of wires of nozzles …
4. … disconnect blocks from conclusions of nozzles.
5. Turn out a nut of fastening of the bringing pipeline …
6. … also take the pipeline aside.
7. Turn out a nut of fastening of the drain pipeline …
8. … also take the pipeline aside.
9. Turn out two bolts of fastening of a fuel stage to an inlet pipe …
10. … and accurately remove a stage assembled with nozzles.
11. Weaken an inhaling of a collar of fastening of a vacuum hose, remove a hose from the union of the regulator of pressure and remove a fuel stage from the car.
12. Establish a fuel stage upside-down, having replaced sealing rings of nozzles.