5.20.9. Check and replacement of the regulator of idling

It will be required to you: a key "on 10", the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Disconnect a block of a plait of wires from regulator conclusions.
3. Give a direct current of 12 in on average contact of the socket of the regulator and serially on side contacts. At the same time the gate has to turn, closing...
4.... or opening an opening of the input channel. If it does not occur, so the regulator is faulty and it needs to be replaced.
5. For replacement of the regulator weaken collars and disconnect lower from the regulator...
6.... and top air supply hoses.
7. Turn out two bolts of fastening and remove the regulator. Remove a fastening collar from the regulator.
8. Install the new regulator of idling as it should be, the return to removal.