5.6.1. Replacement of forward support of a suspension bracket of the power unit

The power unit is installed on two rubber pillows on both sides of the engine and on one support under a transmission case.
It will be required to you: keys "on 14", "on 19", "on 22", a face head "on 19", a jack.
1. Remove protection of a case of the engine (see. "Removal and installation of mudguards of the engine").
2. Turn off two nuts of fastening of a pillow to a frame arm, holding bolts from a provorachivaniye.
3. Through a wooden or rubber pro-rate establish a support under a case of the engine and raise the left side that the pillow was released.
4. Turn out three bolts of fastening of an arm to the block of cylinders of the engine …
5. … also take an arm assembled with an engine support.
6. Clamp an arm in a vice, turn out a bolt …
7. … also remove a support.
8. Establish a support as it should be, the return to removal.
9. Similarly replace the right support.