5.6.2. Replacement of a back support of a suspension bracket of the power unit

It will be required to you: keys "on 14", "on 17", "on 19", a face head "on 17".
1. Through a wooden or rubber pro-rate establish a support under a transmission case.
2. Remove a cap from a hat of a bolt of fastening of a back support to an arm …
3. … also turn out a bolt.
4. Poddomkratte transmission.
5. Turn off four nuts of fastening of a cross support to a frame from the left and right side, holding bolts from a provorachivaniye …
6. … also remove a cross frame.
7. Turn off two nuts of fastening of a back support to a frame cross-piece, holding bolts from a provorachivaniye …
8. … also remove a support.
9. Establish a support as it should be, the return to removal.