6.1.8. Replacement of the working cylinder of the drive of switching off of coupling

Remove the working cylinder for replacement at the incomplete switching off of coupling caused by liquid leak.
It will be required to you: a key "on 17", a face head "on 12", a graggers.
1. Turn out a bolt union of fastening of the connecting coupling of a hose to the working cylinder of the drive of switching off of coupling …
2. … also disconnect a hose from the cylinder.

Prevention
Do not lose the sealing washers established from two parties of the connecting coupling of a hose.

3. Turn out two bolts of fastening of the working cylinder of the drive of switching off of coupling to a coupling case …
4. … also remove the working cylinder.
5. Install the working cylinder of the drive of switching off of coupling as it should be, the return to removal.
6. Remove air from a coupling switching off hydraulic actuator (see. "Replacement of working liquid in a coupling switching off hydraulic actuator").