6.2.3. Replacement of epiploons of the transmission

Continuous decrease in level of oil in a case of the transmission can be caused by loss of tightness of consolidation of a main shaft. In a cover of the bearing of a main shaft one is established samopodzhimny an epiploon.
It will be required to you: a key "on 12", the screw-driver with a flat edge, the screw-driver with a crosswise edge, the hammer and a mandrel of the suitable size.
1. For replacement of an epiploon of a main shaft remove the transmission (see. "Removal and installation of the transmission").
2. Remove the coupling switching off bearing coupling assembled with a fork (see. "Replacement of the bearing and fork of switching off of coupling").
3. Turn out seven bolts of fastening of a cover of the back bearing of a main shaft and uncover the transmission.
4. Hook the screw-driver and take an epiploon from a cover.
5. Grease a working edge of an epiploon with jellied Litol-24 lubricant or its analog and by means of a suitable mandrel press an epiploon in a cover against the stop.
6. Establish details as it should be, the return to removal.