6.4.3. Removal and installation of cardan transfer

It will be required to you: keys "on 14", "on 17", the hammer, a chisel.
1. By means of the hammer and a chisel mark a relative positioning of a flange of the back driveshaft and a flange of a reducer of the back bridge, similarly mark a relative positioning of a flange of the driveshaft and a drum of the parking brake.
2. Holding bolts from a provorachivaniye, turn off four nuts of fastening of the driveshaft to a flange of a reducer of the back bridge and take bolts.
3. Turn out four bolts of fastening of a flange of the driveshaft to a flange of the conducted shaft of the transfer case …
4. … also remove the back driveshaft.
5. Before removal of the forward driveshaft mark a relative positioning of flanges of the driveshaft concerning a flange of the forward bridge and the conducted shaft of the transfer case how it was done for the back driveshaft.
6. Turn off four nuts of fastening of a flange of the driveshaft to a flange of the conducted shaft of the transfer case, holding bolts the second key from a provorachivaniye, and take out bolts.
7. Holding bolts from a provorachivaniye, turn off four nuts of fastening of the driveshaft to a flange of a reducer of the forward bridge, take bridge bolts …
8. … also remove the forward driveshaft.
9. The back driveshaft is removed similarly.
10. Install driveshafts as it should be, the return to removal.