6.5.10. Removal and installation of the forward bridge

Peredny Bridge is removed at wear-out of all details when partial repair becomes inexpedient, or for replacement of its beam.
It will be required to you: keys "on 17", "on 19", "on 22", "on 24", "on 27", couplers of springs of a suspension bracket.
1. Slow down the car the parking brake, establish an emphasis under back wheels of the car and a poddomkratta a forward part of the car.
2. Weaken an inhaling of nuts of fastening of forward wheels.
3. Disconnect a brake hose from a tee of the pipeline located on the left side of the forward bridge.
4. Remove springs of a forward suspension bracket (see. "Replacement of a spring of a forward suspension bracket").
5. Turn off a nut of a bolt of the lower fastening of the shock-absorber, holding the second key bolts from a provorachivaniye, and take a bolt. Similarly disconnect the second shock-absorber from a longitudinal bar.
6. Disconnect the driveshaft from a flange of the leading gear wheel of the forward bridge (see. "Removal and installation of cardan transfer").
7. Turn off a nut of a bolt of fastening of cross thirst for a frame arm.
8. Disconnect steering draft from the lever of a rotary fist (see. "Adjustment and replacement of tips of steering drafts").
9. Turn off nuts of fastening of step-ladders of a bar of the stabilizer of cross stability of a forward suspension bracket (see. "Replacement of details of the stabilizer of cross stability of a forward suspension bracket").
10. Disconnect both longitudinal bars from the forward bridge (see. "Replacement of a longitudinal bar of a forward suspension bracket").
11. Lift a forward part of the car and roll out the forward bridge from under the car.
12. Turn off nuts of wheels and remove wheels.
13. Establish the forward bridge as it should be, the return to removal. After installation remove air from a forward contour of a hydraulic actuator of brakes (see. "Pumping of a hydraulic actuator of the brake system").