6.5.5. Removal and installation of a half shaft

Half shafts of forward wheels are removed for replacement at their damage, failure of CV JOINTS and for receiving access to other units.
1. Slow down the car the parking brake, establish an emphasis under back wheels of the car. Lift and establish a forward part of the car on support, remove a wheel.
2. Remove a brake disk (see. "Replacement of a brake disk").
3. Turn out bolts of fastening of a pin to a rotary fist and remove a pin assembled with a nave and the coupling of shutdown of wheels (see. "Removal and installation of a rotary fist").
4. Take from a bridge case a half shaft assembled with the CV JOINT.
5. Before installation of a half shaft put pure jellied SHRUS-4 lubricant in hinges of equal angular speeds.
6. Establish details as it should be, the return to removal.