6.5.6. Replacement of an epiploon of a half shaft of the forward bridge

You make replacement of an epiploon at detection of leak of oil from a rotary fist.
You will need the screw-driver with a flat edge.

Note
The leak of oil can be caused also by excess of oil in a case or a contamination of a sapun.

1. Slow down the car the parking brake, establish an emphasis under back wheels of the car. Lift and establish a forward part of the car on support and remove a wheel.
2. Remove a rotary fist (see. "Removal and installation of a rotary fist").
3. Fix a rotary fist in a vice.
4. Having hooked the screw-driver, take an epiploon from a spherical support of a rotary fist.
5. Establish a new epiploon, having accurately pressed it in a spherical support by means of a mandrel of suitable diameter, and grease a working edge of an epiploon with Litol-24 lubricant.

Note
As a mandrel it is possible to use an old epiploon.

6. Establish details as it should be, the return to removal.