6.6.4. Removal and installation of a half shaft

The half shaft is removed at detection of leak of oil from under laying of a flange of fastening of a half shaft, at adjustment or replacement of hug bearings and for removal of differential.

The leak of oil can be caused also by excess of oil in a case or a contamination of a sapun.

You will need a key "on 14".
1. Slow down the car the parking brake and establish an emphasis under car wheels. Establish a control lever by the transmission in neutral situation.
2. Turn out ten bolts of fastening of a flange of a half shaft to a nave.
3. Screw bolts in two carving openings in a half shaft flange which are specially intended for dismantle of a half shaft. Evenly rolling bolts, a vypressuyta a half shaft from a differential gear wheel …
4. … take a half shaft from a case of the bridge and remove laying.
5. Establish a half shaft as it should be, the return to removal.