6.6.5. Removal and installation of the main transfer of the back bridge

The main transfer is removed for repair or replacement.
It will be required to you: keys "on 10", face heads "on 19", "on 27".
1. Establish an emphasis under forward wheels of the car.
2. Turn out a stopper from a case of the back bridge …
3. … also merge oil.
4. Remove both half shafts (see. "Removal and installation of a half shaft").
5. Disconnect the back driveshaft from a flange of a reducer of the back bridge (see. "Removal and installation of cardan transfer").
6. Turn out two bolts of fastening of an arm of draft of the regulator of pressure of brake efforts …
7. … also remove an arm.
8. Turn out other bolts of fastening of a cover of a case of the main transfer …
9. … also uncover with laying.
10. Turn off a nut of fastening of a flange of a shaft of the leading gear wheel of a reducer of the back bridge.
11. Remove a flange with a reflector.
12. Turn out bolts of fastening of covers of bearings of differential, take differential assembled with the conducted gear wheel and a shaft with the leading gear wheel assembled with the back bearing.
13. Remove an epiploon of a flange of a shaft of the leading gear wheel (see. "Replacement of an epiploon of a shaft of the leading gear wheel of a reducer of the back bridge").
14. Take the forward bearing of a shaft of the leading gear wheel from a case of the back bridge.
15. Vypressuyte from a case external holders of forward and back bearings of a shaft of the leading gear wheel.
16. Establish details as it should be, the return to removal.
17. Adjust the main transfer (see. "Adjustment of bearings of the main transfer of the back bridge").
18. Fill in oil in a case of the back bridge (see. "Check of level and dolivka of oil in a case of the back bridge").