6.6.6. Dismantling and assembly of differential of the back bridge

It will be required to you: keys "on 14", "on 17".
1. Remove differential assembled with the conducted gear wheel (see. "Removal and installation of the main transfer of the back bridge").
2. Press differential bearings from a differential box cup.
3. Turn out ten bolts of fastening of the conducted gear wheel to differential and remove the conducted gear wheel.
4. Turn out eight bolts which are pulling together differential box cups, and separate cups.
5. Take gear wheels of differential and satellites with axes.
6. Collect differential as it should be, the return to removal.

Note
Before assembly of differential oil gearbox gear wheels of half shafts, satellites, persistent washers and axes of satellites.

7. Tighten bolts of fastening of the conducted gear wheel to differential evenly, rolling each bolt on one turn, serially passing from a bolt to a bolt on diameter.