7.1.10. Replacement of a longitudinal bar of a forward suspension bracket

It will be required to you: keys "on 24" (two), "on 27", passatizh.
1. Install the car on a viewing ditch or, having slowed down the car the parking brake and having established an emphasis under back wheels of the car, lift and establish a forward part of the car on support.
2. Turn off nuts of step-ladders of fastening of the stabilizer.
3. Turn off a nut of a bolt of the lower fastening of the shock-absorber and take a bolt (see. "Replacement of the shock-absorber of a forward suspension bracket").
4. Turn off nuts of bolts of fastening of a longitudinal bar to the forward bridge …

The longitudinal bar fastens to the forward bridge two bolts.

5. … also beat out fastening bolts.
6. Rasshplintuyte nut of back fastening of a longitudinal bar …
7. … turn off a hinge nut …
8. … remove a persistent washer and the rubber plug …
9. … and then remove a longitudinal bar assembled with the basic plug from an arm on a body.
10. Attentively examine a longitudinal bar and details of its hinge. If the bar is bent, has cracks or vspuchivaniye, and rubber-metal hinges (saylentblok) hardened or cracked, replace the damaged details.
11. By means of a special stripper or mandrels of the suitable size to a vypressuyta rubber plugs of hinges, previously to a vypressuyta the metal plug.
12. Press details of hinges as it should be, the return to removal.

Good advice
Before a press fitting of rubber-metal hinges (saylentblok) apply on them saturated soap solution.

13. Establish new details as it should be, the return to removal.

Finally tighten threaded connections of a forward suspension bracket on the car standing on the earth.