7.1.4. Removal and installation of a pin of a rotary fist

It will be required to you: a key "on 14", development.
1. Slow down the car the parking brake, establish an emphasis under back wheels of the car. Lift and establish a forward part of the car on support, remove a wheel.
2. Remove a nave assembled with bearings (see. "Removal and installation of a nave of a forward wheel").
3. Turn out six bolts of fastening of a guard to a rotary fist...
4. … remove a protective guard …
5. … and a pin with laying.
6. Vypressuyte persistent washer 1 and plug 2, and also pins of a rotary fist.
7. Similar to a vypressuyta a persistent washer and the plug from a spherical support (see. "Removal and installation of a rotary fist").
8. Press the new plug in a pin and develop its development 32+0,34 +0,17 mm.
9. Establish new persistent washers in a pin and a spherical support.
10. Establish the removed details as it should be, the return to removal.
11. Adjust hug bearings of a forward wheel (see. "Adjustment of a gap in bearings of naves of forward wheels").