7.1.8. Replacement of springs of a forward suspension bracket

Springs replace for the following reasons:
– deterioration in smoothness of the course, frequent "breakdowns" of a suspension bracket;
– a visible distortion of the car or a considerable difference on height at the draft of springs more than 20 mm which arose in the course of long operation or because of severe road conditions;
– strongly expressed traces of impact of rounds of a spring;
– breakage of a spring.

Note
Replace springs with a set.

You will need couplers of springs.
1. Slow down the car the parking brake, establish an emphasis under back wheels of the car, lift a jack a forward part of the car to unload a spring, and remove a wheel.
2. Establish couplers on a spring and squeeze it.
3. Take a spring.
4. Remove the top laying assembled with a cup.
5. Establish details as it should be, the return to removal.

Note
Establish a spring so that the end of its extreme round rested against a spring cup ledge.