7.2.4. Removal and installation of a pin of a back wheel

It will be required to you: a key "on 14", development.
1. Slow down the car, having established an emphasis under forward wheels of the car. Lift and establish a back part of the car on support.
2. Remove a half shaft (see. "Removal and installation of a half shaft").
3. Remove a wheel.
4. Remove a nave assembled with bearings and the brake drum (see. "Removal and installation of a nave of a back wheel").
5. Turn out a nut of a brake tube of the back working brake cylinder.
6. Turn out six bolts of fastening of a protective guard and a pin.
7. Remove a protective guard assembled with the brake mechanism and a pin of a back nave of a wheel.
8. Vypressuyte persistent washer 1 and plug of a pin of a rotary fist 2.
9. Similar to a vypressuyta a persistent washer and the plug from a spherical support.
10. Press the new plug in a pin and develop its development 32+0,34 +0,17 mm.
11. Establish new persistent washers in a pin and a spherical support.
12. Establish the removed details as it should be, the return to removal.
13. Adjust hug bearings of a back wheel (see. "Adjustment of a gap in bearings of naves of forward wheels").