7.2.6. Replacement of the shock-absorber of a back suspension bracket

The shock-absorber replace at emergence of a leak of damping liquid, decrease in efficiency of clearing of fluctuations of a body or emergence of frequent rigid blows at a release and compression ("breakdown") of a suspension bracket (see. "Check of technical condition of details of a suspension bracket on the car").

Prevention
Change faulty shock-absorbers only in couples (forward, back) or a set (all four).

It will be required to you: keys "on 17", "on 19".
1. Slow down the car, having established an emphasis under forward wheels of the car, and a poddomkratta a back part of the car to unload a suspension bracket, but do not tear off a wheel from the earth.
2. Turn off a nut of a bolt of the lower fastening of the shock-absorber, holding the second key a bolt from a provorachivaniye …
3. … also take out a bolt.
4. Turn off a nut, remove a persistent washer …
5. … also remove the shock-absorber.
6. Establish details as it should be, the return to removal.
7. Similarly replace the second shock-absorber.