8.4.1. Adjustment and replacement of tips of steering drafts

At detection of a gap in tips of steering drafts execute the following.
1. Tighten a cap against the stop …

Note
For descriptive reasons adjustment is shown on the removed tip.

2. … then weaken it on 1/2 turns …
3. … and in this situation to a zakernita.
If tightening of a cap did not succeeded to eliminate a gap, replace a tip of steering draft.
It will be required to you: keys "on 8", "on 22", "on 27", passatizh, a stripper of spherical hinges.
1. Rasshplintuyte nut of fastening of a finger of the spherical hinge.
2. Weaken a lock-nut of a tip of steering draft.
3. Turn off a nut of fastening of a finger of the spherical hinge.
4. Establish a stripper of spherical hinges …
5. … and a vypressuyta a finger of the spherical hinge from the lever of a rotary fist.
6. Turn out a tip from steering draft, counting speed that at installation whenever possible not to break a corner of a convergence of wheels.

Note
The right and left tips of steering drafts have the different direction of a carving.

7. If on a new tip there is no press butterdish, turn out it from old …
8. … also screw in a new tip. Similarly replace a faulty press butterdish.