8.5.2. Pumping of system of the hydraulic booster of steering

Pumping (removal of air) of system of the hydraulic booster of steering is necessary after any works connected with depressurization of system (replacement of the pump or pipelines). A sign of availability of air in system is wedging of a steering wheel in attempt to sharply turn it. Besides, the pump publishes the increased noise at the time of turn of a steering wheel, and liquid in a tank usually foams.
1. Fill in working liquid in system of the hydraulic booster to necessary level (see. "Check of level and dolivka of working liquid in a tank of the hydraulic booster of steering").
2. Establish an emphasis under back wheels and you will hang out a forward part of the car.
3. Launch the engine and let's it work as 15-20 pages.
4. Turn a steering wheel against the stop to the left, then against the stop to the right.

Prevention
Do not detain a wheel in extreme provisions.

5. Repeat operation 4 not less than three times.
6. Turn a steering wheel in average situation and stop the engine.
7. Check the level of working liquid in a tank of the hydraulic booster and if necessary bring it to norm.

Note
Level of working liquid has to be in a tank at the level of a grid of the bulk filter.