8.5.3. Washing of account and safety valves of the pump of the hydraulic booster

Wash out account and safety valves of the pump of the hydraulic booster of steering when replacing oil in system of the hydraulic booster.
You will need a key "on 24".
1. Turn out the stopper cap located over an exhaust outlet of the pump.

Note
For descriptive reasons operation is shown on the removed pump of the hydraulic booster.

Prevention
At a reversing of a stopper cap be careful and hold a stopper not to lose as under it the spring is established.

2. Take out a spring …
3. … and zolotnik of the account valve.
4. Turn out a saddle of the safety valve and remove adjusting laying.

Good advice
For a reversing of a saddle clamp the lower part of the account valve in a vice through a rubber pro-rate not to damage the valve.

Prevention
Do not change the number of adjusting laying not to break adjustment of the safety valve.

5. Take a ball and a guide with a spring from a zolotnik of the account valve.
6. Wash out details and blow them compressed air.
7. Establish details as it should be, the return to removal.