8.5.6. Replacement of the steering mechanism

It will be required to you: keys "on 13", "on 22", "on 30", face heads "on 17", "on 19", a drift, the hammer, passatizh, a stripper of spherical hinges, a two-gripping stripper.
1. Take the forelock …
2. … turn off a nut of fastening of a wedge of the cardan hinge …
3. … also remove the washer established under it.
4. Vypressuyte wedge …
5. … also take it from a fork of the cardan hinge.

Note
On cars with the steering mechanism 31519-3400011-10 the cardan hinge fastens to a shaft of the steering mechanism a bolt.

6. Disconnect the driveshaft from a shaft of the steering mechanism.
7. Turn out a bolt union of fastening of a delivery hose of the hydraulic booster of steering …
8. … also disconnect a hose from the steering mechanism.
9. Similarly disconnect a drain hose.

Note
Connections of hoses with the steering mechanism are condensed with copper washers. Replace strongly pressed out washers new.

10. Vypressuyte from a steering bipod a finger of the spherical hinge of a tip of steering draft (see. "Adjustment and replacement of tips of steering drafts").
11. Turn out two bolts of fastening of the steering mechanism to a turnkey frame "on 17" …
12. … and one on a turn-key basis "on 19" …
13. … then remove the steering mechanism from the car.
14. Turn off a nut of fastening of a steering bipod …
15. … also press it by means of a stripper.
16. Establish details as it should be, the return to removal.
17. Remove air from system of the hydraulic booster of steering (see. "Pumping of system of the hydraulic booster of steering").