9.10.1. Adjustment of effort of the lever of the regulator of brake forces

Adjustment of effort of the lever of the regulator of brake forces needs to be carried out periodically to time of operation and it is obligatory when replacing back springs.
It will be required to you: keys "on 10", "on 17".
1. Install the equipped car on the flat horizontal platform.
2. Weaken an inhaling of a lock-nut and turn out an adjusting bolt on two-three turns.
3. Wrap an adjusting bolt before contact with a shaft of the piston of the regulator of brake forces.
4. Tighten a bolt on 2/3 turns (4 sides of a head of a bolt) if the bolt of M10x1,5 is established, or on 11/3 turns (8 sides of a head of a bolt) if M10x1 bolt is established.
5. Tighten a lock-nut.
6. Check a regulator piston stroke. When pressing a brake pedal the piston of the regulator has to start from the case on 1,7–2,3 mm. Lack of a piston stroke, its insufficient or excessive course testify to malfunction of the regulator or its drive.