9.11.2. Replacement of a cable of the drive of the parking brake

Replace a cable of the drive of the parking brake at its excessive pulling (impossibility of adjustment of the drive of the parking brake) and mechanical damages.
It will be required to you: keys "on 19", "on 24", passatizh.
1. Unbend rugs for receiving access to fastening of a cable to the body basis.
2. Rasshplintuyte finger of fastening of a cable of the drive of the parking brake …
3. … also take it from openings of the lever and a tip of a cable.
4. Take away a cable from the lever.
5. Turn off a nut of fastening of a cable to the body basis …
6. … remove a nut and a lock washer.
7. Uncover the floor hatch (see. "Removal and installation of covers of the hatch of a floor").
8. Rasshplintuyte finger of the intermediate lever …
9. … also remove from it a cable tip.
10. Holding a cable cover from a provorachivaniye, weaken an inhaling of a nut of fastening of a cable to an arm …
11. … take a cable through a cut in an arm and remove it from the car.
12. Establish details as it should be, the return to removal (except floor hatch covers).
13. Adjust the drive of the parking brake (see. "Adjustment of the drive of the parking brake").
14. Establish floor hatch covers.