9.11.4. Removal and installation of the razzhimny mechanism of the parking brake

It is more convenient to perform work on a viewing ditch.
You will need a key "on 14".
1. Establish an antiretractable emphasis under wheels.
2. Remove a drum …
3. … and blocks of the parking brake (see. "Replacement of a drum and blocks of the parking brake").
4. Uncover the floor hatch (see. "Removal and installation of covers of the hatch of a floor").
5. Rasshplintuyte finger of the lever of the drive of the parking brake …
6. … remove the lever from a finger and take him aside.

Note
Further process of removal of the razzhimny mechanism is for descriptive reasons shown on the removed transfer case.

7. Turn out two bolts of fastening …
8. … also remove razzhimny the mechanism from the car.
9. Remove a plate of the limiter of the case of balls.

Fig. 9.4. Details of the razzhimny mechanism of the parking brake: 1 – case of balls of the razzhimny mechanism; 2 – balls; 3 – pushers of the razzhimny mechanism; 4 – case of the razzhimny mechanism

10. Take from the case 4 of the razzhimny mechanism the case of 1 balls (fig. 9.4), balls 2 and pushers 3.
11. Grease the surface of pushers contacting to balls, jellied lubricant and install pushers in the case of the razzhimny mechanism.
12. Fill jellied lubricant the case of balls, establish balls …
13. … and then the case of balls assembled with balls in the case of the razzhimny mechanism.
14. Establish details as it should be, the return to removal.