9.11.6. Removal and installation of the lever of the drive of the parking brake

The lever of the drive of the parking brake installed in interior of the car on the basis of a body has a non-demountable design, at damage of the gear sector or a doggie it is necessary to replace it assembled.
You will need a key "on 12".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Disconnect a wire from the switch of a control lamp of turning on of the parking brake.
3. Disconnect a cable of the drive of the parking brake from the lever (see. "Replacement of a cable of the drive of the parking brake").
4. Cast away a floor rug for access to fastening of the lever.
5. Turn out two bolts of fastening …
6. … also remove the lever of the drive of the parking brake.
7. If necessary remove the switch of a control lamp of turning on of the parking brake (see. "Replacement of the switch of a control lamp of turning on of the parking brake").
8. Before installation on the car grease with jellied lubricant the gear sector of the lever.
9. Establish details as it should be, the return to removal.
10. Adjust the drive of the parking brake (see. "Adjustment of the drive of the parking brake").